Equipment Specifications Library
Basic Model Information
-
Manufacturer:Vermeer
-
Model:D500x500
-
Rig Size:200,000 lbs pullback and over
View Manufacturers View Models Back to Listing
Specifications
Additional Info
-*2010 - 2016*-
DRILL RACK
Length (Minimum Transport): 45' (13.7 m)
Width: 8.5' (2.6 m)
Height (Minimum Transport): 11.5' (3.5 m)
Weight: 82000 lbs (37194.6 kg)
Suspension: Dual axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5' (1.5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees
DRILLER CABIN
Length: 10' (3.1 m)
Width: 8' (2.4 m)
Height: 8' (2.4 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning
In-wall combination unit
POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)
OPERATIONAL
Thrust: 500000 lbs (2224.1 kN)
Pullback: 500000 lbs (2224.1 kN)
Maximum Spindle Torque: 50000 ft-lb (67791 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 50000 ft-lb (67791 Nm)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Carriage Speed at Maximum Engine RPM: 64 ft/min (19.5 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 2
Mud Swivel: 3" (7.6 cm)
LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8 " (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6' (1.8 m)
Inside Diameter: 9.8" (24.9 cm)
UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)
SAFETY
Remote Lockout: Yes
Strike Alert: Yes
-*DECEMBER 2015*-
DRILL RACK
Length (Minimum Transport): 45' (13.7 m)
Width: 8.5'(2.6 m)
Height (Minimum Transport): 115' (3 5 m)
Weight: 82000 lbs (37194.6 kg)
Suspension: Dual axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5' (1 .5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees
DRILLER CABIN
Length: 10'(3.1 m)
Width: 8'(2.4 m)
Height: 8' (2.4 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning: In-wall combination unit
POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3'(3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)
OPERATIONAL
Maximum Spindle Torque: 50000 ft-lb (67791 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 50000 ft-lb (67791 Nm)
Thrust: 500000 lbs (226796.2 kg)
Pullback: 500000 lbs (226796.2 kg)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Carriage Speed at Maximum Engine RPM: 64 ft/min (19.5 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 2
Mud Swivel: 3" (7.6 cm)
LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6'(1.8 m)
Inside Diameter: 9.8" (24.9 cm)
UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)
SAFETY
Remote Lockout: Yes
Strike Alert: Yes
FEATURES
Strike alert
Remote lockout
Operator presence system
-High-torque, low-speed hydraulic motors power the rotary and carriage drives. On the rotary drive, a single through-shaft motor is utilized to power the drill string and downhole tooling. The carriage drive is made up of high-torque / low-speed motors matched with planetary gearboxes that provide smooth and powerful force with fewer motors. The hydraulic design allows an operator to simultaneously run full rotary torque and full rotary rpm.
-The thrust box includes a large bearing-pack assembly designed to absorb the axial load caused by thrust and pullback. Shifting the load from the rotational motor to this assembly reduces one of the factors that can shorten the life of a motor.
-The floating top vise is mounted to the carriage assembly and grips the drill rod directly in front of the quill, helping prevent rod wrap or windup when breaking out of the upper joint. This also eliminates the need to travel the front vise up the length of the rack, reducing cycle times and ultimately increasing productivity. A built-in float prevents premature wear to the drill-rod threading during upper-joint makeup and breakout.
-*2015*-
DRILL RACK
Min transport length: 50.3' (15.3 m)
Width: 8.5' (2.6 m)
Min transport height: 11.5' (3.5 m)
Weight: 84,800 lb (38,464.6 kg)
Suspension: Dual axle with air ride suspension
Front base anchor length: 20' (6.1 m)
Front base anchor width: 6' (1.8 m)
Front base anchor height: 38.4" (97.5 cm)
Front small anchor length: 10.5' (3.2 m)
Front small anchor width: 5.5' (1.7 m)
Front small anchor height: 22.8" (57.9 cm)
Rear base anchor length: 16'(4.9 m)
Rear base anchor width: 7.8' (2.4 m)
Rear base anchor height: 15.6" (39.6 cm)
Drill rack angle: 10° - 15° (17.5% - 26.2%)
DRILLER'S CABIN
Length: 11.6' (3.5 m)
Width: 7.9' (2.4 m)
Height: 8' (2.4 m)
Weight: 7800 lb (3538 kg)
Heat and air conditioning:3 ton (10.6 kW) in-wall combination unit
POWER PACK
Length: 24.4' (7.4 m)
Width: 8.1' (2.5 m)
Height: 10.3' (3.1 m)
Weight: 38,000 lb (17,236.5 kg)
Make and model: (1) CAT C-27 ACERT
Fuel type: Diesel
Fuel capacity: 500 gal (1892.7 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Max engine rpm: 2000 rpm
Gross horsepower: 800 hp (597 kW)
EPA certification family: Tier 3 (EU Stage IIIA)
OPERATIONAL
Thrust/Pullback: 493,000 lb (2193 kN)
Max spindle torque: 52,900 ft-Ib (71,722.8 Nm)
Max spindle speed at max engine rpm (with PS800): 73 rpm
Max carriage speed at max engine rpm: 71 fpm (21.6 m/min)
Number of rotation motors: 1
Number of drive motors: 2
Mud swivel: 3" (7.6 cm)
LOWER BREAKOUT VISE
Breakout torque: 147,500 ft-lb (199,983.1 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lb (1723.7 kg)
Travel: 6' (1.8 m)
Inside diameter: 10" (25.4 cm)
UPPER BREAKOUT VISE
Clamp force: 176,000 lb (782.8 kN)
Configuration: 2-jaw clamp
Inside diameter: 10" (25.4 cm)
SAFETY
Remote lockout: Yes
Strike alert: Yes
DRILL RACK
Length (Minimum Transport): 45' (13.7 m)
Width: 8.5' (2.6 m)
Height (Minimum Transport): 11.5' (3.5 m)
Weight: 82000 lbs (37194.6 kg)
Suspension: Dual axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5' (1.5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees
DRILLER CABIN
Length: 10' (3.1 m)
Width: 8' (2.4 m)
Height: 8' (2.4 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning
In-wall combination unit
POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)
OPERATIONAL
Thrust: 500000 lbs (2224.1 kN)
Pullback: 500000 lbs (2224.1 kN)
Maximum Spindle Torque: 50000 ft-lb (67791 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 50000 ft-lb (67791 Nm)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Carriage Speed at Maximum Engine RPM: 64 ft/min (19.5 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 2
Mud Swivel: 3" (7.6 cm)
LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8 " (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6' (1.8 m)
Inside Diameter: 9.8" (24.9 cm)
UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)
SAFETY
Remote Lockout: Yes
Strike Alert: Yes
-*DECEMBER 2015*-
DRILL RACK
Length (Minimum Transport): 45' (13.7 m)
Width: 8.5'(2.6 m)
Height (Minimum Transport): 115' (3 5 m)
Weight: 82000 lbs (37194.6 kg)
Suspension: Dual axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5' (1 .5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees
DRILLER CABIN
Length: 10'(3.1 m)
Width: 8'(2.4 m)
Height: 8' (2.4 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning: In-wall combination unit
POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3'(3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)
OPERATIONAL
Maximum Spindle Torque: 50000 ft-lb (67791 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 50000 ft-lb (67791 Nm)
Thrust: 500000 lbs (226796.2 kg)
Pullback: 500000 lbs (226796.2 kg)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Carriage Speed at Maximum Engine RPM: 64 ft/min (19.5 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 2
Mud Swivel: 3" (7.6 cm)
LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6'(1.8 m)
Inside Diameter: 9.8" (24.9 cm)
UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)
SAFETY
Remote Lockout: Yes
Strike Alert: Yes
FEATURES
Strike alert
Remote lockout
Operator presence system
-High-torque, low-speed hydraulic motors power the rotary and carriage drives. On the rotary drive, a single through-shaft motor is utilized to power the drill string and downhole tooling. The carriage drive is made up of high-torque / low-speed motors matched with planetary gearboxes that provide smooth and powerful force with fewer motors. The hydraulic design allows an operator to simultaneously run full rotary torque and full rotary rpm.
-The thrust box includes a large bearing-pack assembly designed to absorb the axial load caused by thrust and pullback. Shifting the load from the rotational motor to this assembly reduces one of the factors that can shorten the life of a motor.
-The floating top vise is mounted to the carriage assembly and grips the drill rod directly in front of the quill, helping prevent rod wrap or windup when breaking out of the upper joint. This also eliminates the need to travel the front vise up the length of the rack, reducing cycle times and ultimately increasing productivity. A built-in float prevents premature wear to the drill-rod threading during upper-joint makeup and breakout.
-*2015*-
DRILL RACK
Min transport length: 50.3' (15.3 m)
Width: 8.5' (2.6 m)
Min transport height: 11.5' (3.5 m)
Weight: 84,800 lb (38,464.6 kg)
Suspension: Dual axle with air ride suspension
Front base anchor length: 20' (6.1 m)
Front base anchor width: 6' (1.8 m)
Front base anchor height: 38.4" (97.5 cm)
Front small anchor length: 10.5' (3.2 m)
Front small anchor width: 5.5' (1.7 m)
Front small anchor height: 22.8" (57.9 cm)
Rear base anchor length: 16'(4.9 m)
Rear base anchor width: 7.8' (2.4 m)
Rear base anchor height: 15.6" (39.6 cm)
Drill rack angle: 10° - 15° (17.5% - 26.2%)
DRILLER'S CABIN
Length: 11.6' (3.5 m)
Width: 7.9' (2.4 m)
Height: 8' (2.4 m)
Weight: 7800 lb (3538 kg)
Heat and air conditioning:3 ton (10.6 kW) in-wall combination unit
POWER PACK
Length: 24.4' (7.4 m)
Width: 8.1' (2.5 m)
Height: 10.3' (3.1 m)
Weight: 38,000 lb (17,236.5 kg)
Make and model: (1) CAT C-27 ACERT
Fuel type: Diesel
Fuel capacity: 500 gal (1892.7 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Max engine rpm: 2000 rpm
Gross horsepower: 800 hp (597 kW)
EPA certification family: Tier 3 (EU Stage IIIA)
OPERATIONAL
Thrust/Pullback: 493,000 lb (2193 kN)
Max spindle torque: 52,900 ft-Ib (71,722.8 Nm)
Max spindle speed at max engine rpm (with PS800): 73 rpm
Max carriage speed at max engine rpm: 71 fpm (21.6 m/min)
Number of rotation motors: 1
Number of drive motors: 2
Mud swivel: 3" (7.6 cm)
LOWER BREAKOUT VISE
Breakout torque: 147,500 ft-lb (199,983.1 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lb (1723.7 kg)
Travel: 6' (1.8 m)
Inside diameter: 10" (25.4 cm)
UPPER BREAKOUT VISE
Clamp force: 176,000 lb (782.8 kN)
Configuration: 2-jaw clamp
Inside diameter: 10" (25.4 cm)
SAFETY
Remote lockout: Yes
Strike alert: Yes
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.